Toa N-8000 Series Ver.1.41 - Manual (Page 208)

5-64
Chapter 5: SYSTEM SETTINGS BY SOFTWARE Chapter 5: SYSTEM SETTINGS BY SOFTWARE
Group: Remote response group
5.9.2. Remote response group settings
Setting the remote response station group permits any station programmed for this function to respond to calls
to other stations within the group.
Up to 16 stations can be preset.
Note
Stations connected to the N-8010EX cannot be assigned to the Remote Response Group.
[Creating new remote response group]
Step 1. Click "Remote response group" tab to display the following screen.
Step 2. Press "New" to create a remote response station group.
A new group column is added each time the button is pressed, permitting group registration of each
station.
Step 3. Choose the stations to be configured into the group from the list.
Click the cell for the station to be selected so that it becomes checkmarked.
• Up to 16 stations can be programmed per group.
• A single station cannot be assigned to more than one group.