Toa N-8000 Series Ver.1.41 User Manual

Page 42

Advertising

1-29

Chapter 1: GENERAL DESCRIPTION

Setting

Speed
Dialing

Auto-dialing
(N-8000MS/
8500MS only)

One-touch
dialing

The dial operation (up to 20-digit numbers)
programmed into the station's auto dialer can be
performed by one-touch dialing.

The dial operation (up to 20-digit numbers)
programmed into the station's [7], [8], [9], [0] or off-
hook keys can be called by one-touch dialing.

P. 2-9

P. 2-10

P. 2-9

P. 2-10
P. 5-54
P. 5-59

–

Mic Off

Call hold

When it is desirable to hold the line during a
conversation, if any dialing key ([0] – [9]) is pressed, the
microphone is disabled as long as the key is pressed.

Pressing the Hold key during a conversation places the
conversation on hold, transmitting a hold tone to both
parties. If the Hold key is pressed again, the hold mode
is cancelled, and the original conversation is restored.

Hold

P. 2-11

Calls to a busy station are automatically transferred to
another designated station, if group hunting function is
set to the called station.

When no response is made to a call for a set period of
time, the call is automatically transferred to another
designated station.

Calls to stations are automatically transferred to
another designated station without sounding a call
tone. Two different modes are available: one is call
forwarding, in which calls are manually rerouted to the
selected station, and the other is time-based call
forwarding, which transfers calls only when the preset
time is reached.

Automatic
Transfer

Group hunting

Absence transfer

Call forwarding

Remote Response*

Calls to a station can be answered by pressing the
Push-to-talk key of another station, provided both
stations are assigned to the same group.

If a called station is busy, as indicated by a busy tone,
pressing the [9] key transmits a short priority call tone,
then forcibly terminates the current conversation,
allowing the call to go through. Access to priority call
operation or refusal of priority calls can be set
individually for each station.

Executive Priority*

Current conversations can be placed on hold to call a
third party by pressing the Transfer key. The original
conversation can be subsequently restored or
transferred to the third party after conclusion of the
second call.

Call transfer*

P. 2-15
P. 5-30
P. 5-49
P. 5-52
P. 5-56

P. 2-16
P. 5-30
P. 5-49
P. 5-52
P. 5-56

P. 2-17
P. 2-18
P. 5-30
P. 5-49
P. 5-52
P. 5-56

P. 2-20
P. 5-64

P. 5-52
P. 5-56