Toa N-8000 Series Ver.1.41 - Manual (Page 245)

7-6
Chapter 7: MULTIFUNCTIONAL STATION MENU SCREEN OPERATION (N-8000MS /8500MS ONLY)
1 : N e t w o r k s e t
2 : L i n e A t t r i b u t e
L i n e a t t r i b u t e
E x c h a n g e N o . :
L i n e a t t r i b u t e
E x c h a n g e N o . : 2 4
E X 2 4 : L I N E 0 1
N o p r o g r a m m i n g
E X 2 4 : L I N E 0 1
N o p r o g r a m m i n g
Dial key Indication Type of stations Corresponding model
0 No programming Non
1 8000MS Multifunctional master station,
IP Multifunctional master station
N-8000MS/8500MS
2
3
8010MS Standard master station N-8010MS
4
8011MS Hands-free master station N-8011MS
8020MS Industrial-use master station N-8020MS
5 8031MS Flush-mount master station N-8031MS
6 8050DS Door station, IP door station N-8050DS/8540DS
E X 2 4 : L I N E 0 1
M u l t i f u n c t i o n
X
6.3. Station Number Settings
It is possible to set the station number for all stations and IP stations.
Step 1. Using the up or down arrow keys or the [2] key on
the maintenance screen, move the cursor to "2: Line
Attribute."
Step 2. Press the Select key to display the line attribute
setting screen.
Step 3. Enter the equipment number (01 to 80) of the
Exchange or IP station to be set with the dial keys
(2-digit number), then press the Select key.
Step 4. Enter the line number (01 – 16) of the line to be set
with the dial keys (2-digit number), then press the
Select key.
For IP stations, select the line number 01.
Step 5. Use the arrow keys or dial key to select the type of
station connected to the designated line, then press
the Select key.
The types of stations selectable at this point are as
follows.
Selecting "No programming" only completes the
registration and reverts the screen back to Step2,
permitting the next Exchange number to be entered
for the line attribute setting.
L i n e a t t r i b u t e
E x c h a n g e N o . :
X