Toa N-8000 Series Ver.1.41 - Manual (Page 48)

1-35
Chapter 1: GENERAL DESCRIPTION
Building A
Zone 1
Speaker
Zone 2
Building B Building C
Zone 3
Speaker
Hello, Mr. TOA.
Please respond.
Zone 1 Zone 2
Speaker
Hello, Mr. TOA.
Please respond to Response 002.
0 0 2
(Zone number with
3-digit length)
8.4. Responding to Paging
If the paged party responds at a station, the paged party can be put through to the paging party. The following
two response modes are available. Use the supplied N-8000 Software program to set either mode.
8.4.1. Automatic response
If the paged party dials the number assigned to paging response, the paging party who initiated the paging
last is called and put through to the paged party.
To respond to the paging, use the station assigned to the paged zone. Use this mode when each paging zone
is independent. When using external PA speakers, their zones must match those of master stations.
8.4.2. Zone number dialing
When making a paging, the paging party notifies the paging zone to use, and the paged party dials the
designated zone number when responding. If the paged party responds dialing the designated zone number,
the paging party who made the paging to the designated zone last is called and put through to the paged
party.
Use this mode in locations where broadcasts from multiple zones can be heard or if only the PA Paging is
used. To respond to the paging, use the station assigned to the paged zone. Any station can also respond to
the paging as long as it is connected to the same exchange as the station assigned to the paged zone or the
PA paging output are connected to.
Note
The Automatic response does not function in the paged zone
to which only the PA paging is assigned.