Toa N-8000 Series Ver.1.41 - Manual (Page 79)

2-27
Chapter 2: FUNCTIONS AND OPERATION
3.3. Responding to Paging
If the paged party responds at the nearest station, the paging party is called and put through to the paged
party. "Automatic Response" and "Zone Number Designation Response" modes are available, and the system
is preset to one of the two paging response modes. (Refer to
p. 5-30 , 5-49 .)
Note
The station that receives station paging operates in either Conversation priority mode or Paging priority mode,
which has been already set to the station.
When in Paging priority mode, the station being paged cannot respond to the paging. Respond to the paging
after the paging call ends.
3.3.1. Automatic response
If the paged party responds dialing the Paging Response key, the paging party who made the last page is
called and put through to the paged party.
[Operation]
If the paged party presses the Paging Response key, the paging party who made the last page is called and
put through to the paged party.
Building A
Zone 1
Speaker
Zone 2
Building B Building C
Zone 3
Speaker
Hello, Mr. TOA.
Please respond.
• Since each paging zone is independent, responding from any station where a paging is audible connects the
paged party to the paging party.