Activating n-8000 software program – Toa N-8000 Series Ver.1.41 User Manual
Page 152
Advertising
5-8
Chapter 5: SYSTEM SETTINGS BY SOFTWARE
3. ACTIVATING N-8000 SOFTWARE PROGRAM
Step 1. Double-click the shortcut icon created on the desk-top screen when installing, or double-click the
N-8000.exe created in the installed folder directly.
[User Certification] screen is displayed.
Step 2. Select "System name", enter password, then press [OK].
Note
System name and password are case-sensitive.
When setting a new system name, select "New system", then press [OK].
After system name and password have been entered correctly, N-8000 Software program initial
screen is displayed.
System name and password are factory-preset to "N-8000" and "guest" respectively.
For changing System name or Password, refer to
Advertising