Toa N-8000 Series Ver.1.41 - Manual (Page 247)

7-8
Chapter 7: MULTIFUNCTIONAL STATION MENU SCREEN OPERATION (N-8000MS /8500MS ONLY)
3 : C l o c k s e t t i n g
4 : R e s e t E X
R e s e t E X . O K ?
Y e s N o
R e s e t E X . O K ?
Y e s N o
3 : C l o c k s e t t i n g
4 : R e s e t E X
8 : 2 2 A M
2 0 0 0
Step 1. Using the up or down arrow keys or the [4] key on the
maintenance screen, move the cursor to "4:Reset EX."
Step 2. Press the Select key to display verification screen.
Step 3. Pressing the left or right arrow keys, move the cursor to
"Yes."
Step 4. Press the Select key to revert the screen to Step 1,
then the Exchange or N-8500MS restarts.
Dialing operations are refused during restarting.
When restart has been completed, the display returns
to its normal standby mode.
6.5. Restarting the Equipment
Restart the exchange or N-8500MS* when network settings have been changed.
The exchange can be restarted at the Multifunctional Station even without pressing "Reset" key located on the
exchange's front panel.
* Exchange when the station performing restart is N-8000MS, and the N-8500MS itself when it is the N-8500MS.
Note
Before restarting the exchange, ensure that no paging, conversation, or firmware update is in progress.