Toa N-8000 Series Ver.1.41 - Manual (Page 199)

5-55
Chapter 5: SYSTEM SETTINGS BY SOFTWARE Chapter 5: SYSTEM SETTINGS BY SOFTWARE
IP Station: Scan Monitor
5.6.4. Scan Monitor settings (IP master station only)
Step 1. Click "Scan Monitor" tab to display the following setting screen.
Step 2. Set the scan monitor sequencing time in 1-second units from 1 to 10 seconds.
Step 3. Set the group of stations to be monitored.
Input the number of station to be monitored in the order of monitoring.