Toa N-8000 Series Ver.1.41 - Manual (Page 33)

1-20
Chapter 1: GENERAL DESCRIPTION
2
1
9
10
11 12 13
3
4
5
6
7
8
1. Handset
Lift the handset for handset conversation. Lifting
the handset disconnects both the hands-free
microphone and the speaker.
2. Dial directory
Writes the dial registration of the party to be called
to this directory.
3. Status indicator (Red)
Flashes when a call is received, continuously
lights during a conversation, and is off while in
standby mode. The indicator also continuously
lights while receiving a paging announcement.
4. Speaker
Outputs call tones and used for hands-free
conversations.
5. Function key [FUNCTION]
Use this key to perform function settings such as
assigning call transfer recipients or programming
one-touch dialing.
6. Redial key [REDIAL]
Permits the last called number to be dialed. (Refer
to
p. 2-6 .)
7. Transfer key [TRANSFER]
Used to transfer the current conversation to
another station. (Refer to
p. 2-12 .)
8. Push-to-talk key [PTT]
Pressing this key while calling a party by means
of a continuous call tone permits a voice call to
be made. (Refer to
p. 2-7 .) Also, pressing this
key during a hands-free conversation establishes
a one-way conversation from the party who
pressed the key. (Refer to
p. 2-6 .)
9. Dial keys
Use these keys to make a call or set a function.
10. Clear key [C]
Terminates the conversation.
11. Paging key [CALL]
Makes a paging. (Refer to p. 2-23 .)
12. Paging response key [RESP.]
Responds to a paging.
(Refer to
p. 2-27 .)
13. Hold key [HOLD]
Places the conversation on hold.
(Refer to
p. 2-11 .)
6.7. N-8010MS Standard Master Station
[Top]