Toa N-8000 Series Ver.1.41 - Manual (Page 61)

2-9
Chapter 2: FUNCTIONS AND OPERATION
2.4. Speed Dialing
2.4.1. Auto-dialing (N-8000MS/8500MS only)
The dial operation (up to 20-digit numbers) programmed
into the station's auto dialer can be performed by one-
touch dialing.
• Auto Dial keys can be programmed individually at each
station.
• The contents programmed into each Auto Dial key can
be confirmed at each station.
1 : A u t o - d i a l i n g
2 : L i n e m o n i t o r
A u t o - d i a l 1 :
A u t o - d i a l 4 :
2 0 0 4
A u t o - d i a l 4 :
A u t o - d i a l 4 :
2 0 0 4
1 0 : 0 8 A M
2 0 0 0
X
4
or
[Example]
[Programming]
Step 1. Press the Menu key to set the display to Menu
mode.
Step 2. Press the Select key to set the display to auto-
dial programming mode and display the data
already programmed into Auto Dial key 1.
Tips
• Use the Left and Right arrow keys to scroll the
display of programmed numbers with more
than 15 digits.
• Since there are no factory program settings,
the display is initially blank.
Step 3. Select the desired Auto Dial key by pressing the
corresponding Auto Dial key directly or moving
the cursor using the Up and Down keys.
Step 4. Press the Select key to allow the contents
programmed into the selected Auto Dial key to
be changed.
Step 5. Enter new programming contents using the Dial
keys (12), Paging key, Paging Response key,
Hold key, Transfer key, and/or Function key.
Entering a number longer than 15 digits causes
the screen to scroll.
Step 6. Press the Select key to enter the number into the
program of the selected Auto Dial key. To
continue programming other keys, return to Step
3 and repeat the process.
Step 7. Press the Menu key to return the screen to the
normal (standby) mode.
Call
1