Toa N-8000 Series Ver.1.41 User Manual
Page 43
1-30
Chapter 1: GENERAL DESCRIPTION
Setting
Group Blocking
Arbitrary station groups (up to 31 groups) can be set to
permit or disallow calls between groups.
Time-Out
The duration of calls, conversations and paging can be
limited by pre-programming time intervals (10 – 990
seconds) for individual exchanges, multi interface units
or IP stations.
Dialing the Paging Response key automatically
initiates a response to the paging last received.
Dialing the number assigned to paging response
automatically initiates a response to a next-to-last
paging.
Paging
Response
Automatic
response
Zone number
designation
paging
Door Remote Control
(Only when the
N-8050DS/8540DS is used.)
Door station's contact output can be used to remotely
control external equipment such as electronic lock.
The contact output terminals can be shorted for a set
period of time by the dial operation to perform this
function from the master station engaged in
conversation with the door station.
Scan Monitor
The station can scan an arbitrary group of pre-
programmed stations for auditory monitoring.
Station Speaker Output Setting
Permits adjustment of the station speaker sound
volume.
Ambient Noise Control
Automatically measures the ambient noise level of the
station and sets the station for proper hands-free
conversation.
–
Operation
Function
Description
Reference page
Calls can be made simultaneously to all of the pre-
programmed zones.
Calls can be made to one of the pre-programmed
zones.
Calls can be made to up to 10 zones of the pre-
programmed multiple zones.
Paging
Zone paging
Selectable
paging
All-call paging
Call- and Talk-Interlocked
Contact Output
(only when the
N-8050DS/8540DS is used)
The contact output of the door station is closed
depending on its own station's operating status.
For example, a flasher or camera can be controlled in
response to call or talk operation.