Toa N-8000 Series Ver.1.41 - Manual (Page 243)

7-4
Chapter 7: MULTIFUNCTIONAL STATION MENU SCREEN OPERATION (N-8000MS /8500MS ONLY)
1 : A u t o - d i a l i n g
2 : L i n e m o n i t o r
3 : L o g f i l e
0 : M a i n t e n a n c e
P a s s w o r d
1 : N e t w o r k s e t
2 : L i n e A t t r i b u t e
1 2 3 4
[Example]
6. SYSTEM SETTINGS
Only a portion of system setting items can be set at the Multifunctional Station.
6.1. Entering Maintenance Screen
Step 1. Press the Menu key to place the display in setting
mode.
Step 2. Use the up or down arrow keys or the [0] key to move
the cursor to "0: Maintenance."
Step 3. Press the Select key to display the password entry
screen.
Step 4. Enter 4-digit-password by pressing dial keys, then
press the Select key.
The default factory setting is 0000. It can be changed
using the N-8000 Software. (Refer to
p. 5-69 .)
After password has been entered correctly, system
setting screen is displayed.
3 : L o g f i l e
4 : V o l u m e
4 : V o l u m e
M I C : 2 S P : 3
1 : A u t o - d i a l i n g
2 : L i n e m o n i t o r
1 0 : 0 8 A M
2 0 0 0
5. CONFIRMING THE SET SOUND VOLUME (N-8500MS ONLY)
The microphone sensitivity and speaker output volume set for the N-8500MS can be confirmed.
Step 1. Press the Menu key to place the display in setting
mode.
Step 2. Use the down arrow key or the [4] key to move the
cursor to "4: Volume."
Step 3. Press the Select key.
Both set levels for microphone sensitivity (MIC) and
speaker output (SP) are displayed.
The MIC level is indicated in 3 steps from 1 (min.) to 3
(max.), and the SP level in 5 steps from 1 (min.) to 5
(max.).
Step 4. Press the Menu key to return the display to its normal
standby mode.