Verilink WANsuite 5230 (34-00304.F) Product Manual - Manual (Page 120)

4-4 W A N s u i t e 5 2 6 0 / 5 2 3 0
System Screen
The first option on the Main menu screen is the System screen (Figure 4.3).
This screen lets you view and set specific information about the unit in
service.
Figure 4.3 System Screen
The System screen displays the fields shown below.
NOTICE: Remember that passwords are case-sensitive and are limited to no more
than 10 characters. When logging on, password must be entered exactly
as it was programmed.
Field Description
Contact Read/write field used to store the name of a point-of-contact for
system failure.
Name Read/write field that holds the unit’s name.
Location Read/write field that holds the unit's location.
FrameStart ID Read/write field that holds the unit's ID that uniquely identifies the
unit and is used in the FrameStart applications.
Blank Fields Read/write fields for user-specific labels and values. Information
resides in non-volatile memory.
Time Read/write field that holds the unit's internal time setting in
standard 24-hour HH:MM:SS format.
Date Read/write field that holds the unit’s internal time setting in
standard 24-hour MM:DD:YY format.
New Password Lets you modify your password by typing in a new password.
Acceptable characters for use in a password are digits 0–9 and
letters A–Z and a–z, for a total of 62 distinct characters.