Verilink WANsuite 5230 (34-00304.F) Product Manual - Manual (Page 96)

3-66 W A N s u i t e 5 2 6 0 / 5 2 3 0
Area Details Screen
Access this screen by clicking on the Area Details button on the Area Table
screen.
Figure 3.54 Area Details Screen
Area ID This parameter has the same format as the IP Address of the Mask Address.
Values: 0.0.0.0
−
255.255.255.255
Default: 0.0.0.0
Enable Displays whether or not this Area is enabled.
Values: Enable, Disable
Default: Enable
Auth Type Indicates type of Authentication.
Values: Simple, None
Default: None
Stub An area can be configured as stub when there is a single exit point from the
area, or when the choice of exit point need not be made on a per-external-
destination basis.
Values: Yes, No
Default: No
Address Summary A configured address range specifies what addresses are contained within an
area. When summarizing the routes in an area to inform other areas, all routes
Add New Defines a new Area.
Refresh Refreshes data on the current page.
Button Function