Verilink WANsuite 5230 (34-00304.F) Product Manual - Manual (Page 49)

W e b S e r v e r I n t e r f a c e 3-19
Interface Details Button
Clicking the “Interface Details” button on the Service Details screen lets you
view interface parameters for the selected service. You will also see the
interface parameters for the selected service if you click on the interface under
the “Interface” column on the Services screen.
Type Details Button
Clicking the “Type Details” button on the Service Details screen lets you view
(and, in some cases, change) interface parameters for the specified service.
The details displayed depend on the type of service currently in effect for the
selected service. You will see this same screen if you click on the service
under the “Type” column on the Services screen. Type Details screens for the
various services are presented below.
Delete Service Button
Click the “Delete Service” button to remove the currently configured service
identified by the Service Details screen. Deleting the selected service will
remove all references to this service. These references may include channel,
frame relay, DLCI, endpoint, and Service Aware configurations.
After clicking the “Delete Service” button, you will be presented with a
confirmation screen (Figure 3.14). Click the “Confirm Delete Service” button
to confirm the removal of the selected service. To cancel, simply invoke your
browser’s “Back” function.
Figure 3.14 Confirm Delete Service Screen
DS0 Monitor Details Screen
To access the DS0 Monitor Details Screen (Figure 3.15), click on “TDM” in
the Type column on the Service Details screen. This screen lets you configure
Type Details Opens the Details screen for the Type of the currently selected
service.
Delete Service Opens the Verify Delete Service screen.
Refresh Refreshes data on the current page.
Button Function