Verilink WANsuite 5230 (34-00304.F) Product Manual - Manual (Page 146)

4-30 W A N s u i t e 5 2 6 0 / 5 2 3 0
ACCM The Asynchronous Control Character Map (ACCM) configuration option
provides a method to negotiate the use of control character transparency on
asynchronous links.
Values: 0–4294967295
Default: 4294967295
MRU The Maximum Receive Units (MRU) configuration option may be set to
inform the peer that the implementation can receive larger packets, or to
request that the peer send smaller packets.
Values: 128–4096
Default: 1500
Port IP Address The IP Address of the port. For unnumbered PPP link, set to 0.0.0.0 and set
IP Address Negotiation to “No.”
Default: 192.168.1.2
Peer IP Address Enter the IP address of the peer that will negotiate authentication protocols.
Default: 192.168.1.3
Virtual PPP Over Endpoint name over which to send PPP encapsulated data (i.e., PPP over
Frame Relay). Valid only when the PPP interface is Virtual.
Auth Challenge
Interval
The time interval (in seconds) between CHAP challenges. A value of “0”
(zero) disables the periodic authentication challenge.
Values: 0
−
3600
Default: 0 (disabled)
Allow PAP This parameter lets the peer negotiate for PAP.
Values: No, Yes
Default: No
Allow CHAP This parameter lets the peer negotiate for CHAP.
Values: No, Yes
Default:No
PAP Username Type the appropriate PAP Username in this field to log on to the peer.
Values: (user established)
Default: Username
PAP Password Enter the password necessary to log on to the peer under a given PAP
Username.
Values: (User Established)
Default: (None)
CHAP Username Type the appropriate CHAP Hostname in this field to challenge the peer.
Values: (User Established)
Default: Hostname