Verilink WANsuite 5230 (34-00304.F) Product Manual - Manual (Page 193)

V T 1 0 0 I n t e r f a c e 4-77
The DHCP Server Details screen provides the following user-activated
prompts:
DHCP Hosts Screen
In some cases, it may be necessary to provide an IP station with a specific
DHCP server name, which may be used by the IP station when making a
DHCP request. That name is included on the DHCP Hosts screen (Figure
4.71), which identifies the DHCP server sending DHCP packets.
Figure 4.71 DHCP Hosts Screen
Host Name The name of the DHCP Server. Default is none.
Select “Add New” to add a new host name.
NOTICE: You must Save and Restart for the new Server name to become active.
Static Entries Screen
The Static Entries screen (Figure 4.72) lists static IP addresses associated with
MAC addresses. This ensures that the same IP address will always be used for
a given PC provided its MAC address is known. These parameters are
configured on the Static Entries Details screen accessed by selecting a number
from the “Entry Index” column.
Prompt Function
Host Table Lists Host names (DHCP server identification).
Static Entry Table Creates a list of static IP addresses associated with MAC
addresses.
Address List Table Defines the addresses available for DHCP clients.
Address Status Table Displays DHCP Server statistics.