Verilink WANsuite 5230 (34-00304.F) Product Manual - Manual (Page 132)

4-16 W A N s u i t e 5 2 6 0 / 5 2 3 0
Format Selects the port’s operating mode.
Values: Sync, Async
Default: Sync
Flow Control Selects the type of flow control to be used if the port is asynchronous.
Values: None, Xon/Xoff, RTS/CTS
Default: None
Character Size Selects the number of bits required to make up one asynchronous character.
Values: Five, Six, Seven, Eight
Default:Eight
Parity Sets the parity bit if the port is asynchronous.
Values: None, Odd, Even
Default: None
Stop Bit Selects the number of bits required to end the asynchronous character.
Values: 1, 2
Default: 1
Current Pin Status The Current Pin Status, which shows the state of the RS-232 pins, is also
displayed on the Serial interface screens.
Ethernet (IP Details) Screen
If you select “Ethernet” from the Interfaces screen, you will bring up an IP
Details screen (Figure 4.12) that lets you view and/or modify the IP
parameters listed below.
Figure 4.12 IP Details Screen
Unit IP Address A unique network address assigned to this unit.
Subnet Mask Defines the network portion of the unit’s IP address.