Verilink WANsuite 5230 (34-00304.F) Product Manual - Manual (Page 77)

W e b S e r v e r I n t e r f a c e 3-47
IP Port Establishes the IP port by which the rule will filter IP traffic (if enabled).
Filter By IP Port Enables or disables filtering of the IP traffic by the IP port specified in the IP
Port field.
Tx Alarm Threshold Specifies the threshold in octets for the Transmit Alarm on this rule.
Tx Alarm Shows the current Transmit Alarm status.
IP Port List Provides a drop-down list of well-known port IDs for TCP and UDP. To enter
a port ID, select an option from the list and click the “Enter” button. The
selected port ID value will then be reflected in the IP Port field.
Traffic Meter Statistics Screen
The Traffic Meter Statistics screen displays a summary of the number of
frames and octets sent over a DLCI that have been counted in accordance
with the Service Aware “rule” that has been established for a Service. As
such, it is Frame Relay specific (i.e., DLCIs only occur in Frame Relay links).
In addition, this screen provides data rate performance information for the
period of time you have specified in the Period Index field (see below).
Figure 3.37 Traffic Meter Statistics Screen
The Traffic Meter Statistics screen reports on the following parameters:
•
Tx Frames
•
Tx Octets
•
Rx Frames
•
Rx Octets
• Rate Peak – the peak data rate for the viewed period (see below)
• Rate Average – the average data rate for the viewed period (see below)