Verilink WANsuite 5230 (34-00304.F) Product Manual - Manual (Page 67)

W e b S e r v e r I n t e r f a c e 3-37
NOTICE: Endpoint names of the form PPP-Sn are reserved by the system. These
system-generated endpoints cannot be modified.
Figure 3.30 Endpoint Table Screen
For most applications, you will not have to modify the Endpoint Table and
DLCI Table. Modification is necessary, however, to configure remote in-band
management (see In Band Management on page 3-41).
Endpoint Details Screen
The Endpoint Details screen (Figure 3.31) provides you with access to the
configuration parameters described in the paragraphs below.
Figure 3.31 Endpoint Details Screen
Name When the unit learns a new DLCI, it creates an endpoint entry and a DLCI
entry if they are not already configured. The endpoint’s Name will
automatically be assigned as “Dynamic”; however, this name can (and most