Verilink WANsuite 5230 (34-00304.F) Product Manual - Manual (Page 93)

W e b S e r v e r I n t e r f a c e 3-63
Figure 3.50 ARP Table Screen
Endpoint Endpoint name (or Interface) through which to send the IP packet to reach the
defined IP Address. The default is the LAN.
IP Address The IP address of the unit for which you want to define the MAC address.
MAC Address The MAC address of the host to be reached.
ARP Status Displays whether this static ARP is enabled or disabled.
The Static ARP Table screen provides the following user-activated buttons:
ARP Details Screen
Access this screen by clicking on the ARP Details button on the ARP Table
screen.
Figure 3.51 ARP Details Screen
Endpoint Endpoint name (or Interface) through which to send the IP packet to reach the
defined IP Address. Currently, this is always the LAN.
Button Function
ARP Details Displays details of ARP tables.
Dynamic ARP Table Displays the dynamically learned MAC <-> IP address.
Add New Adds a new static ARP.
Refresh Refreshes data on the current page.