Verilink WANsuite 5230 (34-00304.F) Product Manual - Manual (Page 214)

5-18 W A N s u i t e 5 2 6 0 / 5 2 3 0
configuring the next four parameters (Start Channel, Number of Channels, and
Bundling). The menu displays the calculated rate in kilobits per second.
Values: Nx56K or Nx64K where N = 1-32 or 1200, 2400, 4800, 9600,
19200, 38400, 57600, 115200 bps
Default: 2048 kbps
Channel Rate The unit can operate at any data rate that is a multiple of 56 or 64 kbps.
Values: Nx56K, Nx64K
Default:Nx64K
NOTICE: Start Channel, Number of Channels, and Channel Rate cannot be
changed if Bundling is not also changed from “Arbitrary.”
Bundling Selects whether the DTE channel assignment is made as a “Contiguous”
group or as “Alternate” channels. Selecting “Alternate” assures ones density.
Because the unit allows individual channels to be configured for a service, a
value of “Arbitrary” will be returned for this parameter if the current channel
allocation is not contiguous or Alternate. The “Arbitrary” value can only be
supplied by the unit
−
it cannot be set by the user.
Values: Contiguous, Alternate, Arbitrary
Default:Contiguous
NOTICE: Because “Alternate” Bundling assigns every other channel, only half
the channels are available.
Start Channel Selects the starting channel in the 31-channel DS1 bit stream. Starting with
the specified channel, the unit automatically assigns the channels that follow.
Number of Channels This display-only field shows the number of channels to be passed through to
the DTE.
V.54 Selecting “Enable” allows the unit to respond to in-band V.54 loop codes. If
you select “Disable,” the unit ignores these codes.
Values: Disable, Enable
Default:Disable
Unframed CCS CAS
Values 0 1
−
31 0
−
15, 17
−
31
Default 0 1 1
Unframed CCS CAS
Values 0 or 32 0
−
31 0-30
Default 0 31 30