Wavetronix SmartSensor Advance Extended Range (SS-200E) - User Guide - Manual (Page 110)

In this chapter
˽ Primary Push Manager
˽ Secondary Push Manager
9
The SmartSensor Advance has two data push managers, which can be set up to push data
over either one of its two serial ports. Data push managers initiate each output data trans-
fer, instead of responding to data requests from another device. The features located in the
Setup Output Communication screen allow you to configure the data push parameters (see
Figure 9.1).
Figure 9.1 – Setup Output Communications
The settings of the push managers are divided into two sections on the Setup Output Com-
munication screen. The top section is the primary data push manager and the bottom sec-
tion is the secondary data push manager.
Setup Output Communications
9