Wavetronix SmartSensor Advance Extended Range (SS-200E) - User Guide - Manual (Page 23)

22 CHAPTER 1 • INSTALLING THE SMARTSENSOR ADVANCE
To target
location
Figure 1.12 – Viewpoint 1
3 Pan the sensor until the target location is centered between the notches in the target
crossbars. The target location should now be centered in the target sights.
Figure 1.13 – Target Location Centered in Target Sights
Note
For a better view, close one eye and move closer to the viewfinder.
If there is not enough headroom to look through the viewfinder, you can use a digital
camera directly behind the viewfinder window for visual verification.
4 Roll the sensor until the long narrow bar is parallel with the center of the lanes of inter-
est on the roadway. Vehicle paths should be parallel to the long narrow bar (see Figure
1.14).