Wavetronix SmartSensor Advance Extended Range (SS-200E) - User Guide - Manual (Page 66)

CHAPTER 6 • SENSOR CONFIGURATION 65
˽ Range – Shows the distance from the stop bar.
˽ Speed – Shows the speed.
˽ Estimated Time of Arrival – Shows the estimated time it will take to arrive at the stop
bar.
˽ Tracker ID – Shows the ID number for each tracker.
˽ Blank – (no tracker data shown)
˽ Disabled – (no tracker shown)
3. Manual Radar Adjustment
The Manual Radar Adjustment screen is used to fine-tune the results of the automatic radar
configuration process (see Figure 6.5).
Figure 6.5 – Manual Radar Adjustment Screen for Advance (left)
and Advance Extended Range (right)
Note
The ranges displayed in the Manual Radar Adjustment window will depend upon
whether you have SmartSensor Advance or SmartSensor Advance Extended Range.
The scale on the right side of the road view indicates the ranges. The SmartSensor
Advance has 5-ft increments up to 600 ft, and the SmartSensor Advance Extended
Range has 7.5-ft increments up to 900 ft.
You will notice in the button tray at the bottom of the window (see Figure 6.5) there is a
Reboot button (green power button icon). When you press this button it will tell you that
the reboot may take up to 20 seconds (see Figure 6.6).