Wavetronix SmartSensor Advance Extended Range (SS-200E) - User Guide - Manual (Page 28)

In this chapter
˽ Mounting the Backplate
˽ Connecting AC Power
˽ Providing System Surge Protection
˽ Terminating the SmartSensor 6-conductor Cable
˽ Contact Closure Connections
2
After installation, each SmartSensor Advance will need to be integrated into the main traf-
fic cabinet for power and surge protection. This chapter contains information on how to
provide power and surge protection to the intersection preassembled backplate located in
the main traffic cabinet.
The intersection preassembled backplate is 11 in. (28 cm) wide and 11.5 in. (29.2 cm) high.
Also available to use are the intersection preassembled 19-inch rack for server racks and the
intersection segmented preassembled backplate for easier installation in traffic cabinets. All
wiring on the rack and backplates is done using stranded wires with wire ferrules for screw
terminal connections (see Figure 2.1).
Connecting Power and
Surge Protection
2