TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router User Manual
Page 103
96
Chapter 5
Configure the Router in Access Point Mode
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the
router.
2. Go to
USB Settings
>
FTP Server
.
3. Click
Add New Folder
.
4. Specify a name for the folder to be shared in the
Share Name
field. And select the
folder you want to share. And determine the access right of user accounts.
5. Click
Apply
.
6. You can check which folder is shared and also edit or delete the folder.
•
To access the USB disk locally:
1. Connect Your USB Disk
Insert your USB storage device into the router’s USB port directly or using a USB cable.
Wait several seconds until the USB LED becomes solid on.
Tips:
• If you use USB hubs, make sure no more than 2 devices are connected to the router.
• If the USB storage device requires using bundled external power, make sure the external power has been
connected.
• If you use a USB hard drive, make sure its file system is FAT32 or NTFS.
• Before you physically disconnect a USB device from the router, safely remove it to avoid data damage:
Go to
USB Settings
>
USB Mass Storage
and click
Disconnect
.
2. Access Your USB Disk Locally
Refer to the following table for access instructions. You can customize user accounts
by referring to
.