TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router User Manual
Page 127
120
Chapter 6
Configure the Router in Range Extender Mode
Tips:
• If you use USB hubs, make sure no more than 2 devices are connected to the router.
• If the USB storage device requires using bundled external power, make sure the external power has been
connected.
• If you use a USB hard drive, make sure its file system is FAT32 or NTFS.
• Before you physically disconnect a USB device from the router, safely remove it to avoid data damage:
Go to
USB Settings
>
USB Mass Storage
and click
Disconnect
.
2. Access Your USB Disk Locally
Refer to the following table for access instructions. You can customize user accounts
by referring to
.
Windows
Open the
Windows Explorer
(or go to
Computer
), type the server
address
ftp://tplinkwifi.net
in the address bar, enter a username and
password and then press [
Enter
].
Note
: Here we take Windows 8 as an example.
Mac
1 ) Click
Go
in the top left corner of the desktop and go to
Connect
to Server
.
2 ) Type the server address
ftp://tplinkwifi.net
.
3 ) Click
Connect
.
4 ) When prompted, select the
Registered User
radio box and enter
a username and password (To learn how to set up an account
for the access, refer to
Tablet
Use a third-party app for network files management.
• To access the USB disk remotely:
Refer to the following table for access instructions. You can customize user accounts
by referring to
.