How can i do that, Done – TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router User Manual

Page 58

Advertising

Chapter 4

Configure the Router in Wireless Router Mode

Router

WAN: 218.18.232.154

LAN

Home

Personal Website

How can I do that?

Set your PC to a static IP address, for example 192.168.0.100.

Visit

http://tplinkwifi.net

, and log in with the username and password you set for the

router.

Go to

Forwarding

Virtual Servers

Click

Add New

. Select

HTTP

from the

Common Service Port

list. The service port,

internal port and protocol will be automatically filled in. Enter the PC’s IP address
192.168.0.100 in the

IP Address

field.

Leave the status as

Enabled

and click

Save

Note:

• It is recommended to keep the default settings of

Internal Port

and

Protocol

if you are not clear

about which port and protocol to use.

• If the service you want to use is not in the

Common Service Port

list, you can enter the corresponding

parameters manually. You should verify the port number that the service needs.

• You can add multiple virtual server rules if you want to provide several services in a router. Please

note that the

Service Port

should not be overlapped.

Done!

Users on the internet can enter

http:// WAN IP

(in this example: http:// 218.18.232.154)

to visit your personal website.

Note:

• If you have changed the default

Service Port

, you should use

http:// WAN IP: Service Port

to visit the

website.

• Some specific service ports are forbidden by the ISP, if you fail to visit the website, please use another

service port.

Advertising