TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router - Manual (Page 118)

111
Chapter 6 Configure the Router in Range Extender Mode
• Password - Enter the password of the host network you want to connect to if it is
encrypted.
6. 4. 2. Extended Network
1. Visit http://tplinkwifi.net , and log in with the username and password you set for the
router.
2. Go to Wireless 2.4GHz/5GHz > Extended Network .
3. Configure the settings of the 2.4GHz/5GHz extended network and click Save .
• Extended 2.4GHz/5GHz SSI D - Either use the Copy Host SSID button to copy the
SSID of the host network or enter a new one (up to 32 characters). This field is case-
sensitive.
• Extended 2.4GHz/5GHz Security - Select one of the security options for the extended
wireless network.
6. 4. 3. Wireless MAC Filtering
Wireless MAC Filtering is used to deny or allow specific wireless client devices to access
your network by their MAC addresses.
I want to:
Deny or allow specific wireless client devices to access my network by their MAC
addresses.
For example , you want the wireless client A with the MAC address 00:0A:EB:B0:00:0B
and the wireless client B with the MAC address 00:0A:EB:00:07:5F to access the router,
but other wireless clients cannot access the router.
How can I do that?
1. Visit http://tplinkwifi.net , and log in with the username and password you set for the
router.
2. Go to Wireless 2.4GHz/5GHz > Wireless MAC Filtering .
3. Click Enable to enable the Wireless MAC Filtering function.