TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router - Manual (Page 63)

56
Chapter 4 Configure the Router in Wireless Router Mode
into the gateway to support address and port translation for certain application layer
“control/data” protocols such as FTP, TFTP, H323 etc.
• FTP ALG - To allow FTP clients and servers to transfer data across NAT, keep
the default Enable .
• TFTP ALG - To allow TFTP clients and servers to transfer data across NAT, keep
the default Enable .
• H323 ALG - To allow Microsoft NetMeeting clients to communicate across NAT,
keep the default Enable.
• SIP ALG - To allow some multimedia clients to communicate across NAT, click
Enable .
• RTSP ALG - To allow some media player clients to communicate with some
streaming media servers across NAT, click Enable .
3. Click Save .
4. 8. 2. Advanced Security
1. Visit http://tplinkwifi.net , and log in with the username and password you set for the
router.
2. Go to Security > Advanced Security , and you can protect the router from being
attacked by ICMP-Flood, UDP Flood and TCP-SYN Flood.
• DoS Protection - Denial of Service protection. Select Enable or Disable to enable or
disable the DoS protection function. Only when it is enabled, will the flood filters be
enabled.
Note: Dos Protection will take effect only when the Statistics in System Tool > Statistics is enabled.
• Enable ICMP-FLOOD Attack Filtering -Check the box to enable or disable this function.