TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router - Manual (Page 73)

66
Chapter 4 Configure the Router in Wireless Router Mode
3. Click Save .
4. 13. IP&MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
a network device’s IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with a matching IP address in
the ARP list, but with an unrecognized MAC address.
4. 13. 1. Binding Settings
1. Visit http://tplinkwifi.net , and log in with the username and password you set for the
router.
2. Go to IP & MAC Binding > Binding Settings .
3. Select Enable for ARP Binding.
4. Click Save .
• To add IP & MAC Binding entries:
1. Click Add New .
2. Enter the MAC address and IP address and select the Bind checkbox.
3. Click Save .
• To modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click
Edit or click Delete Selected .