TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router - Manual (Page 39)

32
Chapter 4 Configure the Router in Wireless Router Mode
1. Visit http://tplinkwifi.net , and log in with the username and password you set for the
router.
2. Go to Wireless 2.4GHz/5GHz > WPS .
3. Follow one of the following three methods to connect your client device to the
router’s Wi-Fi network.
Method ONE: Press the WPS Button on Your Client Device
1. Keep the WPS Status as Enabled and click Add device .
2. Select Press the button of the new device in two minutes and click Connect .
3. Within two minutes, press the WPS button on your client device.
4. A success message will appear on the WPS page if the client device has been
successfully added to the router’s network.
Method TWO: Enter the Client’s PIN
1. Keep the WPS Status as Enabled and click Add device .