TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router - Manual (Page 119)

112
Chapter 6 Configure the Router in Range Extender Mode
4. Select Allow the stations specified by any enabled entries in the list to access as the
filtering rule.
5. Delete all or disable all entries if there are any entries already.
6. Click Add New and fill in the blank.
1 ) Enter the MAC address 00:0A:EB:B0:00:0B/00:0A:EB:00:07:5F in the MAC
Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Leave the status as
Enabled .
4 ) Click Save and click Back .
7. The configured filtering rules should be listed as the picture shows below.
Done!
Now only client A and client B can access your network.
6. 4. 4. Wireless Advanced
1. Visit http://tplinkwifi.net , and log in with the username and password you set for the
router.
2. Go to Wireless 2.4GHz/5GHz > Wireless Advanced .
3. Configure the advanced settings of your wireless network and click Save .
Note: If you are not familiar with the setting items on this page, it’s strongly recommended to keep the provided default
values; otherwise it may result in lower wireless network performance.