TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router - Manual (Page 197)

190
Chapter 8 Configure the Router in Hotspot Router Mode
1 ) Click Add New .
2 ) Select MAC Address as the mode type. Create a unique description (e.g. host_1 )
for the host in the Host Description field and enter 00:11:22:33:44:AA in the
MAC Address filed.
3 ) Click Save .
3. Go to Access Control > Target and configure the target settings:
1 ) Click Add New .
2 ) Select URL Address as the mode type. Create a unique description (e.g. target_1 )
for the target in the Target Description field and enter the URL address, either
the full name or the keywords (for example TP-Link) in the Add URL Address field
and click Add .
Note: Any domain name with keywords in it (e.g. www.tp-link.com) will be blocked or allowed.
3 ) Click Save .
4. Go to Access Control > Schedule and configure the schedule settings:
1 ) Click Add New .
2 ) Create a unique description (e.g. schedule_1 ) for the schedule in the Description
field and set the applied time and click Add .