TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router - Manual (Page 94)

87
Chapter 5 Configure the Router in Access Point Mode
How can I do that?
1. Visit http://tplinkwifi.net , and log in with the username and password you set for the
router.
2. Go to Wireless 2.4GHz/5GHz > Wireless MAC Filtering .
3. Click Enable to enable the Wireless MAC Filtering function.
4. Select Allow the stations specified by any enabled entries in the list to access as the
filtering rule.
5. Delete all or disable all entries if there are any entries already.
6. Click Add New and fill in the blank.
1 ) Enter the MAC address 00:0A:EB:B0:00:0B/00:0A:EB:00:07:5F in the MAC
Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Select
Enabled in the Status drop-down list.
4 ) Click Save and click Back .
7. The configured filtering rules should be listed as the picture shows below.
Done!
Now only client A and client B can access your network.
5. 4. 5. Wireless Advanced
1. Visit http://tplinkwifi.net , and log in with the username and password you set for the
router.