TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router User Manual
Page 69
Advertising
62
Chapter 4
Configure the Router in Wireless Router Mode
3 ) Click
Save
.
5.
Go to
Access Control
>
Rule
and add a new access control rule.
1 ) Click
Add New
.
2 ) Give a name for the rule in the
Description
field. Select
host_1
from the host
drop-down list; select
target_1
from the target drop-down list; select
schedule_1
from the schedule drop-down list.
3 ) Leave the status as
Enabled
as click
Save
.
6.
Select
Enable Internet access control
to enable Access Control function.
7.
Select
Deny the packets not specified by any filtering rules to passthrough this
device
as the default filter rules and click
Save
.
Advertising