TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router - Manual (Page 163)

156
Chapter 8 Configure the Router in Hotspot Router Mode
• Connect manually - You can click Connect/Disconnect to connect/disconnect
immediately. This mode also supports the Max Idle Time function as Connect
on demand mode. The internet connection can be disconnected automatically
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the internet again.
Note: Sometimes the connection cannot be terminated although you have specified the Max Idle Time because some
applications are visiting the Internet continually in the background.
L2TP
If your ISP provides L2TP connection, please select L2TP .
• Username/Password - Enter the username and password provided by your ISP. These
fields are case-sensitive.
• Confirm Password - Enter the Password provided by your ISP again to ensure the
password you entered is correct.
• Connect/Disconnect - Click this button to connect or disconnect immediately.
• Addressing Type - Select either as required by your ISP. If Static IP is selected, please
enter the IP address, subnet marsk, gateway and DNS also provided by your ISP.
• Internet IP Address/ Internet DNS - The internet IP address and DNS server address
assigned by L2TP server.
• MTU(Bytes) - The default MTU size is 1480 bytes. It is not recommended that you
change the default MTU size unless required by your ISP.