TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router User Manual
Page 91
84
Chapter 5
Configure the Router in Access Point Mode
3. Within two minutes, press the WPS button on your client device.
4. A success message will appear on the WPS page if the client device has been
successfully added to the router’s network.
Method TWO: Enter the Client’s PIN
1. Keep the WPS Status as
Enabled
and click
Add Device
.
2. Select
Enter the new device’s PIN
, enter your client device’s current PIN in the
PIN
filed and click
Connect
.
3. A success message will appear on the WPS page if the client device has been
successfully added to the router’s network.
Method Three: Enter the Router’s PIN
1. Keep the WPS Status as
Enabled
and get the
Current PIN
of the router.
2. Enter the router’s current PIN on your client device to join the router’s Wi-Fi network.