TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router User Manual
Page 35
28
Chapter 4
Configure the Router in Wireless Router Mode
•
Location
- Please select the location where you are enjoying the 3G/4G service.
•
Mobile ISP
- Please select the ISP providing the 3G/4G service. The router will
automatically fill in the default Dial Number and APN of that ISP.
•
Username/Password
- Enter the username and password provided by your ISP if any.
•
Authentication Type
- Some ISPs require authentication to access the internet. Please
select Auto or consult your ISP.
•
Auto
- The router will have dynamic negotiation with the dialing server and the
authentication type doesn’t need to be specified.
•
PAP
- Password Authentication Protocol. Select
PAS
if required by your ISP.
•
CHAP
- Challenge Handshake Authentication Protocol. Select
CHAP
if required
by your ISP.
Click
Advance
to set advanced options.
•
MTU size (in bytes)
- The typical MTU (Maximum Transmission Unit) size for 3G or 4G
network is 1480 Bytes.
•
Echo request interval
- Enter a time interval value between 0 and 120 (in seconds) for
which the router requests Access Concentrator to echo at every interval. The default
value is 30. 0 means no detection.