TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router - Manual (Page 174)

167
Chapter 8 Configure the Router in Hotspot Router Mode
8. 3. 6. Wireless Statistics
1. Visit http://tplinkwifi.net , and log in with the username and password you set for the
router.
2. Go to Wireless 2.4GHz/5GHz > Wireless Statistics to check the data packets sent
and received by each client device connected to the router.
• MAC Address - The MAC address of the connected wireless client.
• Current Status - The running status of the connected wireless client.
• Received Packets - Packets received by the wireless client.
• Sent Packets - Packets sent by the wireless client.
• SSID - SSID that the wireless client is connected to.
8. 4. Guest Network
Guest Network allows you to provide Wi-Fi access for guests without disclosing your
main network. When you have guests in your home, apartment, or workplace, you can
create a guest network for them.
1. Visit
http://tplinkwifi.net , and log in with the username and password you set for the
router.
2. Go to Guest Network .
• Allow Guests To Access My Local Network - If enabled, guests can communicate with
hosts.