TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router - Manual (Page 43)

36
Chapter 4 Configure the Router in Wireless Router Mode
6. Click Add New and fill in the blanks.
1 ) Enter the MAC address 00:0A:EB:B0:00:0B/00:0A:EB:00:07:5F in the MAC Address
field.
2 ) Enter Client A/B in the Description field.
3 ) Leave the status as
Enabled .
4 ) Click Save and click Back .
7. The configured filtering rules should be listed as the picture shows below.
Done!
Now only client A and client B can access your network.
4. 3. 5. Wireless Advanced
1. Visit http://tplinkwifi.net , and log in with the username and password you set for the
router.
2. Go to Wireless 2.4GHz/5GHz > Wireless Advanced .
3. Configure the advanced settings of your wireless network and click Save .
Note: If you are not familiar with the setting items on this page, it’s strongly recommended to keep the provided default
values; otherwise it may result in lower wireless network performance.