TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router User Manual
Page 160
153
Chapter 8
Configure the Router in Hotspot Router Mode
•
IP Address
- Enter the IP address in dotted-decimal notation provided by your ISP.
•
Subnet Mask
- Enter the subnet mask in dotted-decimal notation provided by your
ISP. Normally 255.255.255.0 is used as the subnet mask.
•
Gateway
- Enter the gateway IP address in dotted-decimal notation provided by your
ISP.
•
Primary/Secondary DNS Server
- (Optional) Enter one or two DNS addresses in
dotted-decimal notation provided by your ISP.
•
MTU(Bytes)
- The default MTU size is 1480 bytes. It is not recommended that you
change the default MTU size unless required by your ISP.
•
IGMP Proxy
- Select to enable the IGMP Proxy feature if the IPTV service provided by
the ISP is IGMP techonology-based.
PPPoE/Russia PPPoE
If your ISP provides PPPoE connection, select
PPPoE/Russia PPPoE
.
•
PPP Username/Password
- Enter the username and password provided by your ISP.
These fields are case-sensitive.