TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router - Manual (Page 76)

69
Chapter 4 Configure the Router in Wireless Router Mode
To set up for DDNS, follow these instructions:
1. Enter the
Username for your DDNS account.
2. Enter the Password for your DDNS account.
3. Enter the Domain Name you received from dynamic DNS service provider here.
4. Click Login .
5. Click Save .
• Connection Status - The status of the DDNS service connection is displayed here.
• Logout - Click Logout to log out of the DDNS service.
No-ip DDNS
If the dynamic DNS Service Provider you select is www.noip.com , the following page
will appear.
To set up for DDNS, follow these instructions:
1. Enter the
Username for your DDNS account.
2. Enter the Password for your DDNS account.
3. Enter the Domain Name you received from dynamic DNS service provider.
4. Click Login .
5. Click Save .
• Connection Status - The status of the DDNS service connection is displayed here.
• Logout - Click Logout to log out of the DDNS service.
4. 15. IPv6
Your ISP provides information about one of the following IPv6 internet connection
types: Dynamic IPv6, Static IPv6, PPPoEv6 and Tunnel 6to4.