TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router - Manual (Page 11)

4
Chapter 1 Get to Know About Your Router
LED Status Indication
(WPS)
On
The light stays on for 5 minutes when a WPS
connection is established, then goes off.
Blinking WPS connection is in progress.
Off No WPS connection is established.
Port and Button Description
Item Description
Mode Switch This button is used to switch the operating mode of the router.
WAN/LAN
This port functions as the WAN port in Router mode and as the
LAN port in Hotspot, Access Point, Range Extender and Client
mode.
Power The port is used to connect the power adapter.
3G/4G USB
This port is used to plug a 3G/4G modem or a USB disk into.
* 3G/4G modem is only supported in some regions.
(WPS) To establish WPS connection, press this button.