TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router - Manual (Page 87)

80
Chapter 5 Configure the Router in Access Point Mode
5. 1. Status
1. Visit http://tplinkwifi.net , and log in with the username and password you set for the
router.
2. Go to Status . You can view the current status information of the router in Access
Point Mode.
• Firmware Version - The version information of the router’s firmware.
• Hardware Version - The version information of the router’s hardware.
• LAN - This field displays the current settings of the LAN, and you can configure them
on the Network > LAN page.
• MAC Address - The physical address of the router.
• IP Address - The LAN IP address of the router.
• Subnet Mask - The subnet mask associated with the LAN IP address.