TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router - Manual (Page 40)

33
Chapter 4 Configure the Router in Wireless Router Mode
2. Select Enter new device PIN , enter your client device’s current PIN in the PIN filed and
click Connect .
3. A success message will appear on the WPS page if the client device has been
successfully added to the router’s network.
Method Three: Enter the Router’s PIN
1. Keep the WPS Status as Enabled and get the Current PIN of the router.
2. Enter the router’s current PIN on your client device to join the router’s Wi-Fi network.
4. 3. 3. Wireless Security
1. Visit http://tplinkwifi.net , and log in with the username and password you set for the
router.
2. Go to Wireless 2.4GHz/5GHz > Wireless Security .
3. Configure the security settings of your 2.4GHz/5GHz wireless network and click Save .