4. 6. wireless statistics, 4. 7. throughput monitor – TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router User Manual
Page 96
89
Chapter 5
Configure the Router in Access Point Mode
•
Enable WMM
- WMM function can guarantee the packets with high-priority messages
being transmitted preferentially. It is strongly recommended to enable this function.
5. 4. 6. Wireless Statistics
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the
router.
2. Go to
Wireless 2.4GHz/5GHz
>
Wireless Statistics
to check the data packets sent
and received by each client device connected to the router.
•
MAC Address
- The MAC address of the connected wireless client.
•
Current Status
- The running status of the connected wireless client.
•
Received Packets
- Packets received by the wireless client.
•
Sent Packets
- Packets sent by the wireless client.
•
SSID
- SSID that the wireless client is connected to.
5. 4. 7. Throughput Monitor
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the
router.
2. Go to
Wireless 2.4GHz/5GHz
>
Throughput Monitor
to view the wireless throughput
information.