TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router - Manual (Page 203)

196
Chapter 8 Configure the Router in Hotspot Router Mode
8. 13. 2. ARP List
To manage a device, you can observe the device on the LAN by checking its MAC
address and IP address on the ARP list, and you can also configure the items. This page
displays the ARP list which shows all the existing IP & MAC Binding entries.
• MAC Address - The MAC address of the listed computer on the LAN.
• IP Address - The assigned IP address of the listed computer on the LAN.
• Status - Indicates whether or not the MAC and IP addresses are bound.
• Load Selected - Load selected items to the ARP list.
• Delete Selected - Delete selected items.
Note: An item can not be loaded to the IP & MAC Binding list if the IP address of the item has been loaded before. Error
warning will prompt as well.
8. 14. Dynamic DNS
The router offers the DDNS (Dynamic Domain Name System) feature, which allows the
hosting of a website, FTP server, or e-mail server with a fixed domain name (named by
yourself) and a dynamic IP address. Thus your friends can connect to your server by
entering your domain name no matter what your IP address is. Before using this feature,
you need to sign up for DDNS service providers such as www.comexe.cn,
www.dyndns.org, or www.noip.com. The Dynamic DNS client service provider will give
you a password or key.
1. Visit
http://tplinkwifi.net , and log in with the username and password you set for the
router.
2. Go to Dynamic DNS .
Comexe DDNS
If the dynamic DNS Service Provider you select is www.comexe.cn , the following page
will appear.