TP-Link TL-WR902AC AC750 Wireless Dual-Band Travel Router - Manual (Page 21)

14
Chapter 3 Set Up Internet Connection Via Quick Setup Wizard
4. Select the LAN IP type of the router or leave the default settings Smart IP for most
cases, and then click Next .
5. Click Finish to apply the settings.
6. Relocate the router about halfway between your host netowork and the Wi-Fi dead
zone. The extended network shares the same Wi-Fi password as that of your host
network, but may have different wireless network name if you have customized it
during the configuration.
3. 2. 4. Client Mode
1. Select Client for the operation mode of the router.
2. Click Connect to connect to the host network in the AP List page.